Technical Specifications - Russound X125 Installation Manual

TECHNICAL SPECIFICATIONS

X125 Amplifier
Continuous Output Power: 80W per channel at 8 ohms
(<0.2% THD+N) 125W per channel at 4 ohms
Signal-to-Noise Ratio: >93dB A-weighted
Crosstalk: > 70dB @ 1 kHz, ref. to rated power @ 8 ohms
Frequency Response: 20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms, 1W
Input Sensitivity: 500mV for 80W at 8 ohms
Power Requirements: 120VAC 60Hz
Dimensions: 16.5" W x 13.75"D x 3.5"H
Weight: 25.6 lbs. (11.52 kg)
X225 Amplifier
Continuous Output Power: 150W per channel at 8 ohms
(<0.2% THD+N) 225W per channel at 4 ohms
Signal-to-Noise Ratio: >93dB A-weighted
Crosstalk: > 70dB @ 1 kHz, ref. to rated power @ 8 ohms
Frequency Response: 20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms, 1W
Input Sensitivity: 500mV for 150W at 8 ohms
Power Requirements: 120VAC 60Hz 10A
Dimensions: 16.5" W x 13.75"D x 5.25"H
Weight: 34.2 lbs. (15.4 kg)
10
250W bridged mono at 8 ohms
230VAC 50Hz
IEC 320 type connector with 3 terminal detachable power cord.
(41.9 x 34.9 x 8.9 cm)
470W bridged mono at 8 ohms
230VAC 50Hz 5.2A
IEC 320 type connector with 3 terminal detachable power cord.
(41.9 x 34.9 x 13.3 cm)
Russound X125-X225 Installation Manual Rev. 1