Charging The Battery; Loading The Battery - Kodak EasyShare LS753 User Manual

Getting started

Charging the battery

Charge the Li-Ion rechargeable battery before first use.
1
1 Insert the battery into the charger.
2 Insert the plug that matches your electrical outlet.
3 Plug the charger into the outlet.
4 Remove the battery and unplug the charger when the light turns green.
Charging takes approximately 3 hours.
For expected battery life, see
You can also charge the battery using an optional Kodak EasyShare printer
dock or camera dock. Purchase these and other accessories at a dealer of
Kodak products or visit

Loading the battery

CAUTION:
Use only a Kodak EasyShare Li-Ion rechargeable battery
(KLIC-5000) and orient it as shown.
NOTE: When you remove the battery, make sure the camera is turned off.
release tab
2
2
page 3.
www.kodak.com/go/accessories.
1 Open the battery door.
2 Orient the battery as shown, and push it in.
3 Close the battery door.
4 To remove, slide the release tab and pull the
battery out.
3
Red = charging
Green = fully charged
3 hours or less