Table of Contents
Advertisement
Reviewing pictures and videos
2 Press
to highlight Slide Show
3 Press
to highlight Begin Show, then press the OK button.
Each picture and video is displayed once, in the order in which you took them.
To cancel the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can
increase the display interval up to 60 seconds.
1 On the Slide Show menu, press
then press the OK button.
2 Select a display interval.
To scroll through the seconds quickly, press and hold
3 Press the OK button.
The interval setting remains until you change it.
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
OK button.
2 Press
to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power
is exhausted.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any
device equipped with a video input. (Image quality on a television screen may
not be as good as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct
if you connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera video-out port
to the television video-in port (yellow) and audio-in port (white). See your
television user's guide for details.
2 Review pictures and videos on the television.
28
, then press the OK button.
to highlight Interval,
to highlight Loop, then press the
(page
20). The slide show stops
.
Hide quick links:
Advertisement
Table of Contents
