Lcd Panel; Base Unit - NEC VersaDayLite User Manual

LCD Panel

Your NEC Versa comes with an illuminated reflective 10.4-inch Extended Graphics
Array (XGA) Thin Film Transistor (TFT) display that you can adjust for a comfortable
viewing position. To adjust the viewing angle, gently tilt the LCD panel into position.
The primary battery is located behind the display.
To adjust the LCD panel brightness press the
more details about using the system's function keys, see the topic later in this chapter,
"Keyboard Panel."

Base Unit

The base unit of your NEC Versa offers the following features, described after the
figure.
keyboard, may become hot to the touch.
A – LCD Panel
B – LCD Backlight On/Off Switch
C – Microphone
D – NEC VersaGlide Touchpad
LCD Backlight On/Off Switch — Provides backlighting to the reflective LCD
!
panel. Up is on, down is off.
1-4 Introducing Your NEC Versa
After extended use, the surface of the base unit, below the
LCD panel and base unit
and functions keys. For
Fn-F8 Fn-F9
E – Speaker
F – Keyboard
G – Operating Status LEDs