Getting Started; Installing The Software First; Charging The Battery - Kodak EasyShare Z730 User Manual

1

Getting started

Installing the software first

IMPORTANT: Install the software from the Kodak EasyShare software CD before
connecting the camera (or dock) to the computer. Otherwise, the software
may install incorrectly. See the Start Here! guide or

Charging the battery

The rechargeable Li-Ion battery requires charging before first use.
1 Insert the battery into the charger.
2 Insert the plug that matches your electrical outlet.
3 Plug the charger into the outlet.
The indicator light turns red. When the indicator light turns green, remove the battery
and unplug the charger. Charging takes approximately 3 hours.
NOTE: You can also charge the battery using an optional Kodak EasyShare printer dock or camera dock.
Purchase these and other accessories at a dealer of Kodak products or visit
www.kodak.com/go/accessories.
1
page 39.
www.kodak.com/go/support