Displaying Pictures And Videos On A Television; Copying Pictures And Videos - Kodak EasyShare Z730 User Manual

Reviewing pictures and videos
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, move the joystick
the OK button.
2 Move the joystick
The slide show repeats until you press the OK button or until battery power is
exhausted. This setting remains until you change it.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see
stops if you connect or disconnect the cable while the slide show is running.
1 Connect the audio/video cable (included) from the camera video-out port to the
television video-in port (yellow) and audio-in port (white). See your television
user's guide for details.
2 Review pictures and videos on the television.

Copying pictures and videos

You can copy pictures and videos from a card to internal memory or from internal
memory to a card.
Before you copy, make sure that:
■ A card is inserted in the camera.
■ The camera's picture storage location is set to the location from which you are
copying. See Image Storage, page
37
to highlight On, then press the OK button.
25.
to highlight Loop, then press
Video Out, page
www.kodak.com/go/support
28). The slide show