Table of Contents
Advertisement
Status
Picture is too light
Direct printing (PictBridge enabled printer) problems
Status
Cannot find the
desired picture
The Direct print menu
interface turns off
Cannot print pictures
Camera or printer
display an error
message
www.kodak.com/go/support
Solution
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (see
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page
56.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Auto and SCN-Custom modes, adjust the Exposure Compensation
(see
page
38).
Solution
■
Make sure you're not in Favorites mode.
■
Use the Direct print menu to change the image storage location.
■
Press any camera button to redisplay the menu.
■
Make sure there is a connection between the camera and the
printer (see
page
■
Make sure the printer and the camera have power.
■
Follow the prompts to resolve the issue.
page
9).
47).
Troubleshooting
53
Hide quick links:
Advertisement
Table of Contents
