Table of Contents
Advertisement
Doing more with your camera
Using the capture plus tab
Press Menu,
and OK to access settings
White Balance
Choose your lighting
condition.
Available in Auto and
SCN-Custom mode.
Face Detect Capture
Choose if faces get focus
priority.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
AF Zone
Select a large or concentrated
area of focus.
32
,
,
Options
Auto (default)—automatically corrects white balance. Ideal
for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
On (default)—In Auto mode (and in SCN modes designed
for pictures of people), the camera attempts to focus on faces.
Off
Multi-Pattern (default)—evaluates lighting conditions
throughout the image to give an optimum picture exposure.
Ideal for general picture taking.
Center-Weight—evaluates the lighting conditions of the
subject centered in the lens. Ideal for backlit subjects.
Center-Spot—similar to Center-weight, except the metering
is concentrated on a smaller area of the subject centered in the
lens. Ideal when you need an exact exposure of a specific area
in the picture.
Multi-Zone (default)—evaluates 5 zones to give an even
picture focus. Ideal for general picture taking.
Center-Zone—evaluates the small area centered in the lens.
Ideal when you need precise focus.
www.kodak.com/go/support
Hide quick links:
Advertisement
Table of Contents
