Message Playback - AT&T CL83101 User Manual

Answering system

Message playback

If you have new messages only, you hear the new messages in chronological
order. If there are no new messages, the system plays back all the messages
(in chronological order).
When playback begins, the total number of messages is announced. Before
each message, you hear the day and time of the recording. If the date and
time are not set, you hear, "Time and date not set," before playback. After the
last message, you hear, "End of messages." If the recording time is less than
3 minutes, you hear, "Less than three minutes to record" before playback
(see Message capacity on page 78).
To listen to messages at the telephone base:
/�LAY/
Press
listen to the messages.
If there are new and old messages, press q
•
or p
to select >�lay new msgs or
DIR
>�lay old msgs, then press
• If there are only new messages, they will play
automatically.
-OR-
1. When the telephone base is in idle mode, press
MENU/
�ELECT
/�ELECT again to select >�lay messages.
2. Press
MENU
If there are new and old messages, press q
•
p
to select >�lay new msgs or >�lay old msgs,
DIR
then press
• If there are only new messages, they will play
automatically.
The system announces the number of messages, then
begins playback. The message sequence is shown on
the telephone base. If there are no recorded messages,
the telephone base shows No message and you hear,
"You have no message."
on the telephone base to
�TO�
MENU/
to enter the main menu.
�ELECT.
MENU/
CID
�ELECT.
CID
80
>Play messages
Answering sys
p
q
>Play new msgs
or
Play old msgs
p
q
3 New messages
10/15
NEW
NEW MSG #1/3
Charlie Johnson
10/15 NEW
10:01
AM
10:01