Rename Base; Key Tone - AT&T CL83101 User Manual

Telephone settings
Telephone base settings

Rename base

You can create a new name for the telephone base.
1. When the telephone is idle, press MENU/
2. Use q or
CID
/�ELECT.
MENU
3. Use or
q
CID
/�ELECT.
press
MENU
4. Change the telephone base name when prompted.
• Press q
CID
or right.
• Use the dialing keys to enter a name (up to 11
characters). Each time you press a key, a character on that key appears.
Additional key presses produce other characters on that key. See the
chart on page 53.
• Press X/DELETE to backspace and delete a character.
Press and hold X/DELETE to delete all characters.
•
5. Press /�ELECT to save the setting and return to the previous menu.
MENU
There is a confirmation tone.
�ey tone
The telephone base is set to beep with each key press. You can adjust the
key tone volume or turn it off. If you turn off the key tone, there are no
beeps when you press keys.
1. Press MENU/
main menu.
2. Use or
q
CID
/�ELECT.
MENU
3. Use q or
CID
/�ELECT.
MENU
4. Use q or
CID
or Off.
/�ELECT to save your preference. There is a confirmation tone
5. Press
MENU
and the screen returns to the previous menu.
to scroll to >�ettings, then press
p
DIR
to scroll to >Rename base, then
p
DIR
or p to move the cursor to the left
DIR
in idle mode to enter the
�ELECT
to scroll to >�ettings, then press
p
DIR
p to scroll to >�ey tone, then press
DIR
p to select the desired volume
DIR
�ELECT.
26
Clr voicemail
Rename base
>
p
q
RENAME BASE
BASE_______
Rename base

Key tone

>
p
q
KEY TONE
p
q