Upgrading Your Software And Firmware; Additional Care And Maintenance - Kodak EasyShare V550 User Manual

Appendix
Power-saving features
If no action for
1 minute
10, 5, 3 minutes

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/v550downloads.

Additional care and maintenance

If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
Kodak Web site at www.kodak.com/go/v550support.
56
The camera
Screen turns off.
Enters auto power off.
To turn it back on
Press the OK button.
Press a button or insert/remove card.
www.eiae.org
www.kodak.com/go/support
or the