Table of Contents
Advertisement
Troubleshooting
Computer/connectivity problems
Status
Computer does not
communicate with
the camera
Pictures do not
transfer to the
computer
Slide Show does not
run on an external
video device
Picture quality problems
Status
Picture is not clear
44
Solution
Insert a charged battery
Turn on the camera.
Make sure the USB cable is connected to the camera and the
computer
(page
connections. Make sure the camera is seated on the dock.)
Make sure the EasyShare software is installed
Click the Help button in EasyShare software.
Adjust the camera Video Out setting (NTSC or PAL,
page
34).
Make sure the external device settings are correct. (See the
device's user's guide).
Solution
To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light turns green, press the Shutter
button completely down to take the picture.
Clean the lens
(page
Make sure the camera is not in Close-up mode if you are more than
21 in. (0.7 m) from your subject.
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
(page
1).
13). (If using an EasyShare dock, check all cable
56).
www.kodak.com/go/support
(page
12).
Video Out,
Hide quick links:
Advertisement
Table of Contents
