Table of Contents
Advertisement
Status
Flash does not fire
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message appears
on the LCD
Memory card not
recognized or the
camera freezes with
the card.
www.kodak.com/go/support
Solution
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
Transfer the pictures to the computer
Delete pictures from the card or insert a new card.
Change the image storage location to internal memory
(page
32).
Make sure the correct battery type is installed
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera. See
Insert a new or charged battery
Turn the camera off, then on again. Make sure the camera is not
in Favorites mode.
Depress the Shutter button all the way
Insert a new or charged battery
Wait until the Ready light turns green before taking another
picture.
Memory is full. Transfer pictures to the computer
delete pictures
(page
insert another card.
Turn the camera off, then on again.
Remove the memory card.
Remove the battery. Wipe the contacts with a clean, dry cloth
(page
55).
Insert a new or charged battery
If the problem still exists, get help
Card may be corrupted. Format the card in the camera
page
35).
Use another memory card.
(page
page
55.
(page
1).
(page
(page
1).
11), change image storage location, or
(page
1).
(page
Troubleshooting
(page
19).
12).
(page
55).
5).
(page
12),
47).
(Format,
43
Hide quick links:
Advertisement
Table of Contents
