Using Program Mode - Kodak EASYSHARE TOUCH M5370 Extended User Manual

Taking pictures/videos

Using Program mode

The Program Scene mode gives access to the greatest number of settings.
1 Tap , then tap Scene Modes.
2 Tap Program.
Touch Shutter
Self-timer/Burst
Flash
Capture
mode
NOTE: Settings that you change in Program mode apply only to pictures taken in Program mode. Use Reset
Camera (see page
Changing Program mode settings
In Program Scene mode, tap a setting. Then change its value.
Using exposure compensation to adjust brightness
In Program and Panorama modes, you can adjust exposure compensation before you
take a picture to make your pictures darker or lighter. (Only the first picture in
Panorama mode can be adjusted—that adjustment is applied to the remaining
pictures.)
1 Tap Exposure Compensation to access the exposure compensation setting.
2 Drag the slide to increase or decrease exposure compensation.
The scene in the LCD gets lighter or darker.
3 Take the picture when you are satisfied with the exposure compensation level.
21
46) to reset Program mode to its default settings.
Exposure compensation
ISO
White balance
Color mode
Focus/Exposure zone
www.kodak.com/go/support
Sharpness
Settings
Swipe
to see
these
tools.