Using Program Mode - Kodak EASYSHARE M5350 Extended User Manual

Using Program mode

Program mode gives access to manual settings like ISO, White Balance, Focus Zone,
and Exposure Compensation.
1 Press the Mode button
Choose Program, then press OK.
2 Press
Press to change a setting, then press OK to save it.
Self- Exposure
timer compensation
Self-timer/Burst Include yourself in a picture
Exposure
Compensation
ISO
White Balance
Focus Zone
Color Mode
Sharpness
Settings
www.kodak.com/go/support
, choose Scene mode (see
to choose a setting, then press OK.
White
ISO
Balance
rapid succession.
Adjust the exposure. If a scene is too light, decrease the setting; if it's
dark, increase the setting.
Adjust the camera's sensitivity to light. Higher ISO indicates greater
sensitivity.
NOTE: A higher ISO may produce unwanted "noise" in a picture.
To make picture color more accurate, choose the setting that matches the
current lighting.
Choose Multi-Zone, Center-Zone, Face Priority.
Choose Vivid, Full, Basic, Black & White, or Sepia.
Choose Sharp, Normal, or Soft.
Choose Vivid, Full, Basic, Black & White, or Sepia.
page
Focus Color
Zone Mode
(page 18). Burst takes a series of pictures in
Taking pictures/videos
15), and press OK.
Sharpness
Settings
17