Troubleshooting
Computer/connectivity problems
Status
The software installer
does not start
Slide Show does not
run on an external
video device
Computer does not
communicate with
the camera
Picture quality problems
Status
Picture is not clear
53
Solution
■
Choose and install the right version for your computer at
www.kodak.com/go/camerasw.
■
Adjust the camera Video Out setting to NTSC or PAL
page
47).
■
Make sure the external device settings are correct. (See the
device's user guide.)
■
Turn off the camera, then turn it back on.
■
Make sure the battery is charged and installed correctly
page
1).
■
Make sure the KODAK Camera USB Cable, U-8 is connected to the
camera and the computer
camera.
■
See KODAK Software Help at www.kodak.com/go/camerasw.
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens
(see page
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures.
(see page
48). Then turn on the
58).
(see page
45).
www.kodak.com/go/support
(see
(see