Status
Picture is too dark
Picture is too light
Pictures that have
KODAK PERFECT
TOUCH Technology
applied (twice) are
of lower image
quality.
Direct printing (PICTBRIDGE enabled printer) problems
Status
Cannot find the
desired picture
The Direct printing
menu interface turns
off
www.kodak.com/go/support
Solution
■
Reposition the camera for more available light.
■
Use Fill flash
(see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer
(or on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to Pictures
taken in Smart Capture mode.
Solution
■
Use the Direct printing menu to change the image storage location.
■
Press any camera button to redisplay the menu.
17) or change your position so light is not
(see page
17).
Troubleshooting
page
56.)
(see page
21).
page
56.)
(see page
21).
54