Basic Setup; Set Day, Time & Humidity - Bryant Evolution Control Homeowner's Manual

BASIC SETUP

Set Day, Time & Desired Humidity
1 Open the door of the Evolution
2 Press the BASIC button.
3 Adjust the highlighted HOUR setting using
the Left Up/Down button.
4 Press SCROLL to highlight MINUTE.
5 Adjust the MINUTE setting using the Left
Up/Down button.
6 Press SCROLL to highlight DAY.
7 Adjust the current DAY setting, using the Left Up/Down button,
until the correct day is displayed.
8 Press SCROLL to highlight HUMIDITY.
9 Press the red HEAT button to set the heating humidity.
10 Adjust the desired heating humidity using either Up/Down
button.
11 Press the blue COOL button to set the cooling humidity.
12 Adjust the desired cooling humidity using either Right
Up/Down button.
13 If a ventilator has been installed, press scroll to highlight
FRESH AIR.
14 Adjust your desired FRESH AIR setting using the Right
Up/Down button. For a description of fresh air settings, see
FRESH AIR VENTILATION on page 24 in this manual.
15 Press the BASIC button to exit.
If you need to readjust one of your settings, use the SCROLL
button to highlight the desired setting, then make your changes.
®
Control.
- OR -
6