Normal Operation; Turn System On/Off; Heating; Auxiliary Heat - Bryant Evolution Control Homeowner's Manual

NORMAL OPERATION

16 Close the door.
NOTE: You can exit at any time. When exiting, you will be prompt-
ed to save changes if you have made any. Select "YES" to
save your changes, "NO" to revert back to previous settings.

Turn System On/Off

The OFF button is used to turn the system both on and off.

Heating

To select heating, press the red HEAT button.
Heating is confirmed when the red LED
adjacent to the red HEAT button is lit.
Heating is operating when the red LED is
gradually pulsing on and off. (The LEDs can
be turned off. For details, see ADVANCED
SETUP – DISPLAY on page 26.) The heating
temperature will appear in the lower right
screen with the text, "HEAT AT."

Auxiliary Heat

Auxiliary heat is staged electric heating included with many heat
pump systems. Auxiliary heat is automatically activated by the
system when it's too cold for the heat pump to effectively heat
your home. Auxiliary heat operation is confirmed when the red
LED adjacent to the red HEAT button is lit, gradually pulsing on,
then off. (The LEDs can be turned off. For details, see ADVANCED
SETUP – DISPLAY on page 26.) The text, "AUXILIARY HEAT ACTIVE"
will appear below the room temperature.
7