Toshiba RDXV49DTKF Owner's Manual page 36

E3TK0FD_EN.book Page 36 Monday, March 9, 2009 10:00 AM
Notes for the Timer Recording
• If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
• If a disc is not inserted or if a inserted disc is not recordable
(finalised DVD-RW/-R, finalised DVD+R, a fully recorded
disc, etc.), the unit will perform the alternate recording to the
HDD. (See page 34.)
• When a timer recording is completed, the unit will ask you
whether to turn off the unit if there is no timer recording
which starts within 4 minutes, except under conditions listed
below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
The unit will be turned off automatically if you select "Yes" or
if you do not reply in 1 minute.
• When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted.
• The audio language which is selected in the "DVB Setting"
will be recorded for digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• It is prohibited to turn off the unit from 4 minutes before the
programmed starting time.
• It is prohibited to change channel from 15 seconds before
the programmed starting time.
• [REC I] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes before
the starting time during regular or one-touch timer recording,
the recording in progress will be stopped.
• Playback of DVD/CD is prohibited from 2 minutes before the
programmed starting time when the recording media is DVD.
If it comes to 2 minutes before the programmed starting time
during DVD/CD playback, the playback will be stopped.
• When 2 or more programmes are overlapped, "Timer
programme overlapped" appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to "Checking, Cancelling or Correcting the
Timer Programming Information" on page 34.
• If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
press [ENTER\OK] at step
• As to the timer recording in progress (which is shown in red
in the timer programme list), you only can edit the end time.
The changes made during recording will be recognised as
only specific to that recording in progress and it will not
affect the daily or the weekly recording setting.
36
EN
Downloaded From Disc-Player.com Toshiba Manuals
10
on page 34.
Priority of overlapped settings
The unit records programmes according to priority if the timer
programmes overlap.
If the starting time is same:
• The timer programming set first (PROG. 1) has priority.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
The first 2 minutes (at the longest) will be cut off.
When the starting time and the ending time for each
programmes are different:
• A programme that has earlier start time has priority.
PROG. 1
PROG. 2
PROG. 3
Actual
PROG. 1 PROG. 3
recording
The first 2 minutes (at the longest) will be cut off.
If the recording time is partially overlapped:
• The timer programming with the earlier start time (PROG. 2)
has priority. PROG. 1 will start after PROG. 2 recording is
complete.
PROG. 1
PROG. 2
Actual
PROG. 2
recording
The first 2 minutes (at the longest) will be cut off.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not recorded.
PROG. 1
PROG. 2
Actual
PROG. 2
recording
Note for DVD recording
• If the recording time of two programmes are overlapped, or
the End time of a programme and the Start time of another is
same, the first 2 minutes (at the longest) of the subsequent
programme will be cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the beginning of
the PROG. 2 may be cut off.
PROG. 1
PROG. 2
Actual
PROG. 1 PROG. 2
recording
The first 2 minutes (at the
longest) will be cut off.*
* If the cut off time exceeds 3 minutes, the error number "E40"
will appear in "Timer Programming" list.
PROG. 2
recording will start
after PROG. 1
recording is
completed.
PROG. 2
PRO
G. 2
PROG. 1