D Functions For The Rtty Decoder Display - Icom iC-7850 Instruction Manual

Previous view Previous view
5
RECEIVE AND TRANSMIT
Operating RTTY (FSK) (Continued)
■

D Functions for the RTTY decoder display

Push the Mode key [RTTY/PSK] to select the RTTY
q
mode.
• After the RTTY mode is selected, hold down [RTTY/PSK]
for 1 second to toggle between the RTTY and RTTY-R
modes.
• "RTTY" or "RTTY-R" appears.
Push [DECODE](F).
w
• The RTTY decode screen is displayed.
• When tuned to an RTTY signal, the decoded characters
are displayed in the RX contents screen.
Function
<MENU1>
Selects the Function menu.
<MENU2>
Push
HOLD/
CLR
Hold down
TX MEM Enters the RTTY memory screen.
ADJ Enters the threshold level setting mode.
MAIN/
Toggles between the Main and Sub bands.
SUB
Enters the RTTY log set screen.
LOG • Starts/Stop making a log file, or sets the
File type or Storage media.
LOG Displays a log file.
VIEW • You can view the log contents.
SET Enters the RTTY decode set screen.
Toggles between the Expanded or Normal
EXPAND
screens.
• The Dualwatch function should be ON when the Sub
band is selected (p.
Push [EXIT/SET].
e
• Exits the RTTY decode screen.
Action
Turns ON or OFF the Hold func-
tion.
• " " is displayed and the
current screen freezes.
Clears the displayed charac-
ters.
• While the Hold function is ON,
clears the characters and re-
leases the function.
7-10).
(F) Function keys
• RTTY decode screen (MENU1)
Fucntion menu (MENU2)
•
5-16
Mode keys [EXIT/SET]