D Antenna Selection Mode; D Temporary Memory - Icom iC-7850 Instruction Manual

Previous view Previous view
Antenna memory settings (Continued)
■

D Antenna selection mode

The automatic antenna selection (antenna memory)
and the Multi-function [ANT]() key can be deactivated
or you must manually select the desired antenna.
You can set the desired selection in this mode.
q Hold down the Multi-function [ANT]() key for 1 sec-
ond.
ANT
• The " " screen is displayed.
w Push [[ANT] SW](F) to set the antenna selection to
Auto Auto ,
" " "
• Auto Auto:
• Auto Manual:
• Manual Manual:Deactivate the antenna memory
e Push [EXIT/SET].
ANT
• Exits the "

D Temporary memory

The antenna temporary memory memorizes the man-
ually selected antenna. The selected antenna will be
recalled even if frequency band has been changed.
q Hold down the Multi-function [ANT]() key for 1 sec-
ond.
ANT
• The " " screen is displayed.
w Push [TEMP-M](F).
Temporary memory : ON
• "
Push [TEMP-M](F) again to turn OFF
•
e Select the desired frequency band with a band key.
r Push the Multi-function [ANT]() key to select the
desired antenna.
• "★" appears when a different antenna from the original
is selected.
Push [ANT MR](F) to recall the original antenna.
•
"★" disappears.
t Push [EXIT/SET].
ANT
• Exits the "
CAUTION: Before transmitting with a manually se-
lected antenna, make sure the selected antenna
suits the operating frequency. Otherwise the trans-
ceiver may be damaged.
Auto Manual or Manual Manual
" "
Uses the antenna memory. Se-
lecting an antenna with the Multi-
function [ANT]() key can also be
made.

E ach antenna connector is se-
lected according to the stored
settings. A [RX-I/O] connector
is selected with each pushing of
[RX-I/O (F)] and is selected ac-
cording regardless of stored set-
tings.
function. Antenna can be selected
only with the Multi-function [ANT]
() key operation. [RX-I/O] can be
selected with [RX-I/O](F).
" screen.
" appears.
.
" screen.
ANTENNA TUNER OPERATION
• Antenna selection mode
.
"
• Options of the Antenna selection mode
() Multi-function keys
• When the temporary memory is ON.
Appears when a different
antenna from the original
is selected.
13-5
Push [[ANT] SW](F) to select the
antenna selection mode.
(F) Function keys
The temporary
memory is ON.
13