Access Control - Belkin BoB User Manual

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM

Access Control

Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN
interface. In the example above, all incoming and outgoing emails are blocked. The default is to permit all
outgoing traffic (see the following page for details).
The router can also limit the access of hosts within the local area network (LAN).The MAC Filtering Table allows
the router to enter up to 32 MAC addresses that are not allowed access to the WAN port. The following items
are displayed on the Access Control.
Parameter Description
Enable Filtering: Enables or disables the filtering function.
Normal Filtering Table: Displays the IP address (or an IP address range) filtering table.
Click 'Add PC' on the Access Control screen to view the following page.
Page 34