Wds; Nat - Belkin BoB User Manual

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM

WDS

Wireless Distribution System (WDS) provides a means to extend the range of a Wireless Local Area Network
(WLAN). WDS allows an Access Point (AP) to establish a direct link to other APs and allows stations to roam
freely within the area covered by the WDS.

NAT

From this section you can configure the Virtual Server, and Special Application features that provide control
over the TCP/ UDP port openings in the router's firewall. This section can be used to support several Internet
based applications such as web, email, FTP and Telnet.
NAT Settings
NAT allows one or more public IP addresses to be shared by multiple internal users. Enter the Public IP address
you wish to share into the Global IP field. Enter a range of internal IPs that will share the global IP.
Enable or disable NAT module function: Enable or disable the function and then click 'SAVE SETTINGS' to apply
the change.
Page 25