Options And Settings - Asko TD30 Service Manual

Options and settings

Settings are shown on the display or on an LED next to the appropriate button. The machine remembers
the settings and options you make for each program and starts from them next time you select the
program concerned.
Anti-crease
You may choose to have the option active for 1-3 hours.
This option means that the drum will rotate for three seconds a minute after the drying program has
finished. If the Signal option is switched on a signal will sound whenever the drum rotates during this
program as a reminder that the drying program has ended.
Delayed start
You may select a delay of between 1-24 hours.
program will start immediately as usual.
Low temperature
Switch Low temperature on or off by pressing the
the airing program = cold program.
Signal
The option means that a signal three seconds long will sound when the drying program has finished.
Quick cooling
Normally cooling runs for 20 minutes (USA, 15 minutes). Quick cooling reduces the cooling to 5 minutes.
Short cooling cannot be used on the airing program.
means that the option has been switched off.
means that the option has been switched off and the
- button. No temperature selection can be made in