Siemens Gigaset Owner's Manual page 73

Configuring Client TCP/IP
Step 3. Obtain IP Settings from your Gigaset Router
Now that you have configured your computer to connect to your Gigaset Router, it
needs to obtain new network settings. By releasing any old IP settings and renewing
them with settings from your Gigaset Router, you will also verify that you have config-
ured your computer correctly.
1. From the Windows desktop, click the Start button, then Programs, then Accesso-
ries, and then click Command Prompt.
2. In the Command Prompt window, type IPCONFIG /RELEASE and press the
ENTER key.
72