Windows Xp - Siemens Gigaset Owner's Manual

Configuring Client TCP/IP

Windows XP

1. Click the start button and choose Control Panel.
2. Select the Network and Internet Connections icon, then click the Network
Connections icon.
3. Then double-click on the LAN connection with which you are connected to the
router.
4. Click the Properties button in the General tab.
5. Select Internet Protocol (TCP/IP) in the Local Area Connection Properties window.
6. Click the Properties button to set the TCP/IP protocol for the Gigaset Router.
7. You can dynamically assign TCP/IP address settings to a client, or you can manually
configure a client with address settings to meet your specific network requirements.
(Note that the default IP address of the Gigaset Router is 192.168.2.1.)
52