Siemens Gigaset Owner's Manual page 60

Netscape:
1. Open Netscape. Click Edit, then click Preferences.
2. In the Preferences window, under Category, double-click Advanced, then click
Proxies. Check Direct connection to the Internet. Click OK.
3. Repeat these steps for each Windows 95/98/ME computer connected to your Gigaset
Router.
Step 3. Obtain IP Settings from your Gigaset Router
Now that you have configured your computer to connect to your Gigaset Router, it
needs to obtain new network settings. By releasing old IP settings and renewing them
with settings from your Gigaset Router, you will also verify that you have configured
your computer correctly.
1. Click Start - Run.
2. Type WINIPCFG and click OK.
It may take a minute or two for the IP Configuration window to appear.
3. From the dropdown menu, select your network card. Click Release and then
Renew. Verify that your IP address is now 192.168.2.x (where x means 2-254), your
Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168. 2.1. These
values confirm that your Gigaset Router is functioning. Click OK to close the IP Con-
figuration window.
Configuring Client TCP/IP
59