Kodak DC3400 User Manual page 124

Camera
Problem
Picture is too light.
Stored pictures are damaged. Camera memory card
Picture is black and white,
sepia toned, or has too much
contrast.
116
Cause
The flash is not
needed.
The subject is too
close when the flash
was used.
The light sensor is
covered.
The Exposure
Compensation is set
incorrectly.
removed when Ready
light was blinking.
The Effects setting is
set incorrectly.
Solution
Change to Auto flash.
See page 19. Check
the flash default
setting. See page 77.
Move so there is at
least 1.6 ft (0.5 m)
between the camera
and the subject.
Hold camera so your
hands or other
objects do not cover
light sensor.
Decrease the
Exposure
Compensation. See
page 28. Check the
Exposure
Compensation default
setting. See page 80.
Be sure Ready light is
not blinking before
removing card.
Change the Effects
setting to No Effects.
See page 32. Check
the Effects default
setting. See page 82.