Kodak DC3400 User Manual page 107

If your camera came with a serial cable for
a Macintosh computer instead of the serial
adapter plug, connect the end of the serial
cable labelled MAC into the available serial
port on the back of the computer.
Serial ports on Macintosh computers are
usually referred to as modem or
printer ports.
If the ports are not labeled, see your
computer User's Guide for a diagram that
illustrates all of the external ports.
4 Open the serial/USB port door on the side
of the camera.
5 Plug the other end of the serial cable into
the camera serial port.
6 Slide the POWER switch to the right to turn
on the camera.
If you get a message on your computer
stating that you are not connected, refer to
the Connect.PDF document installed with
the software, or the online help for
troubleshooting information.
99