Kodak DC3400 User Manual page 119

Camera Communications
Problem
Computer cannot
communicate with the
camera.
Cause
Camera power is off. Turn the camera on.
The Mode dial is not
set to Connect.
Some Advanced
Power Management
utilities on laptops
turn off ports to save
battery life.
Conflict with another
serial device, such as
a modem or PDA
Camera is not
connected to serial or
USB cable, or cable is
not connected to the
computer serial or
USB port.
Port settings in
software may be set to
the incorrect COM
port.
Solution
See page 3.
Set the Mode dial to
Connect.
See the Power
Management section
of your laptop manual
to disable this feature.
Refer to the serial
communication or
similar section of
your computer
modem, PDA, and/or
operating system
User's Guide.
Connect serial or USB
cable to camera and
computer port. Refer
to the online help, or
see Chapter 7, on
page 95.
Change the COM port
settings to Auto-
Search or to a
specific COM port.
See the online help.
111