Kodak DC3400 User Manual page 121

Camera
Problem
SHUTTER button does not
work.
Camera does not turn on.
Cause
Camera is not turned
on.
Mode dial is not set to
Capture.
Ready light is
blinking. Camera is
processing picture.
The Status Display
reads Full. The
camera memory card
is full.
Batteries are not
properly installed.
Batteries are low or
dead.
Solution
Turn on the camera.
See page 3.
Set the Mode dial to
Capture.
Wait until Ready light
stops blinking before
attempting to take
another picture.
Transfer the pictures
to your computer,
delete pictures on the
card (see page 57),
or insert a card with
available memory
(see page 6).
Remove and reinstall
the batteries. See
page 3.
Batteries need to be
replaced (see page
3), or recharged (see
page 4). Also, you
could use an AC
adapter.
113