Footswitch Operation - Mackie SDR24/96 Operation Manual

Footswitch Operation

Using a footswitch with the SDR24/96 gives you hands-free access to several of
the most-used SDR24/96 functions. The footswitch is extremely handy when you
want to use your hands for other tasks, like playing your instrument, working the
console, or eating pizza. Punching in and out is probably the most common use of
the footswitch, but it can stop and play as well.
Punch punches-in just like pressing PLAY + RECORD and punches-out like
pressing PLAY. When playing, hitting the footswitch punches-in all armed
tracks. When recording, hitting the footswitch again punches-out of Record,
but leaves the transport in Play.
Stop/Play toggles the transport between PLAY and STOP. When the
Transport is stopped, it puts it into play; when moving, it stops the Transport.
To assign the footswitch function:
1. The footswitch function
is assigned in the System
menu, under SDR
Footswitch
(SETUP:Page
Right:System:SDRSw).
2. Use the << / >> buttons to
select Stop/Play or Punch,
then select OK to assign the
footswitch function.
If you have a Remote 24 connected to
the SDR24/96, you can independently assign the remote footswitch function:
To assign the remote footswitch function:
1. The remote footswitch function is assigned in the System menu, under
Remote Footswitch (SETUP:Page Right:System:RemSw).
2. Use the << / >> buttons to
select Stop/Play or Punch,
then select OK to assign the
footswitch function.
ANALOG OUT 1 - 8
ANALOG IN 1 - 8
POWER DIGITAL DIGITAL
USB 1 - 8 9 - 16
IN OUT IN
X2 X2
1-4 5-8
100 - 240V 250mA
50/60Hz
CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC • WOODINVILLE • WA 98072 • USA
MADE IN USA • FABRIQUE AU USA • PATENTS PENDING COPYRIGHT ©1998 THE FOLLOWING ARE TRADEMARKS OR
REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE.", MACKIE DIGITAL SYSTEMS AND THE "RUNNING MAN" FIGURE.
SETUP MENU
Record I/O Sync Transp
SETUP
< SETUP MENU
Disk System
SYSTEM MENU
USBMS SDRSw RemSw Load
SDR FOOTSW: Stop/Play
<<
REMOTE FOOTSW: Stop/Play
<<
ANALOG OUT 9 - 16
ANALOG IN 9 - 16
DIGITAL WORD CLOCK I/O SMPTE
IN OUT
17 - 24
IN OUT
OUT IN OUT
X2
9-12
CAUTION WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
RISK OF ELECTRIC SHOCK NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
REPLACE WITH THE SAME TYPE FUSE AND RATING. UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
TO HDR
REMOTE 24
REMOTE JACK
WARNING
DO NOT PLUG INTO
ETHERNET
>> OK
>> OK
ANALOG OUT 17 - 24
SDR 96 HIGH RESOLUTION
NON-LINEAR RECORDER
ANALOG IN 17 - 24
24 TRACK/24 BIT DIGITAL
AUDIO RECORDER
MIDI FOOT MICRO/
ADAT SYNC
IN OUT SWITCH REMOTE 24 OUT
CNTRL
ADAT SYNC
IN
SERIAL
SERIAL NUMBER MANUFACTURING DATE
9-PIN
Footswitch
FOOT
SWITCH
Operation Guide
>
>
39