Kodak DC3200 User Manual page 41

Camera
Problem Cause
The picture is The flash is not on or did
too dark. not function.
The subject is too far
away for the flash to
have an effect.
The subject is in front of
a bright light.
The picture is The flash is not needed.
too light.
The subject was too
close when the flash was
used.
Stored pictures The Picture Card was
are damaged. inserted or removed
when the green Ready
light was blinking.
The picture is The lens is dirty.
not clear.
The subject was too
close when a picture was
taken.
The subject or camera
moved while a picture
was taken.
Subject was too far away
for the flash to have an
effect.
Cannot delete a The picture is delete-
picture. protected.
Solution
Turn on the flash. See
page 10.
Move to within 8 ft
(2.4 m) of subject.
Change your position so
light is not behind the
subject.
Change to Auto flash.
See page 10.
Move at least 5 ft
(1.5 m) from the subject.
Make sure the Ready
light is not blinking
before inserting or
removing a Picture Card.
Clean the lens. See page
52.
Stand at least 2 ft (0.6 m)
away from the subject.
Hold the camera steady
until a picture is taken.
Move to within 8 ft
(2.4 m) of the subject.
Cancel the protection
setting. See page 19.
6
37