Running A Slide Show On Your Television - Kodak DC3200 User Manual

Running a Slide Show on Your Television

You can show your pictures to an audience by connecting your camera to a
television with a KODAK Video Cable (Cat# 181-7774) and using the Slide
Show feature. With Slide Show activated, the camera consecutively displays
stored pictures at the selected intervals. To conserve batteries, use a KODAK-
specified AC adapter.
A c c e s s e d
i n t e r n a l memo r y .
T o a c c e s s c a r d ,
i n s e r t memo r y c a r d
S L I D E SHOW
CO P Y
F ORMA T
S L I D E S HOW
E X I T
3 S e c
5 S e c
1 0 S e c
2 0 S e c
3 0 S e c
1
Turn off your television and camera.
2
Insert a video cable into the VIDEO OUT
port on the side of your camera, and connect
the other end of the cable to the video-in port
on the television.
3
Set the Power/Mode switch to the
position.
4
Turn the television on, and select the correct
channel for video input.
The picture appears on the television.
5
Press a / button until the picture from
which you want to begin the slide show
appears on the television.
6
Press the MENU button to display the Menu
screen on the television.
7
/
Press a button until SLIDE SHOW is
highlighted, and then press the SELECT
button.
The Slide Show screen appears.
8
Press a / button until the time interval
option you want is highlighted, and then press
the SELECT button.
The pictures change according to the selected
time interval. After showing all the stored
pictures once, the slide show automatically
stops.
To stop a Slide Show, press the SELECT
button.
3
25