Table of Contents
Advertisement
Alignment
Window
The Scanner Utility program does NOT affect the quality of scanned
images. It is only used to establish a connection with the scanner.
Settings that affect the scanned image (i.e., color, size, readability,
Attention
clarity, etc.) can be found in the scanner software programs and
especially the TWAIN interface.
C
o
n
n
e
c
t
i
o
n
S
t
C
o
n
n
e
c
t
i
o
n
S
t
The first step to take when troubleshooting connection problems with your
scanner is to check all physical connections. Make sure your scanner is plugged in
and the USB cable is fit snugly into the rear of your scanner and computer.
Secondly, determine the status of your USB hardware and software
configuration. To do this, please run the Scanner Utility program as described below:
1. Click on the START button, then choose PROGRAMS, PLUSTEK USB
SCANNER and then SCANNER UTILITY.
2. If there is a problem with the installation, the following message will appear:
If you receive the above message, please refer to the Scanning Problems
section of Appendix A Troubleshooting.
3. If the connection is OK, the following window will be displayed:
a
t
u
s
a
t
u
s
12
Verify
Scan
Alignment
Position
Advertisement
Table of Contents
Troubleshooting
