Sd/Mmc Cards And Internal Memory - Kodak EasyShare CX6445 User Manual

Problem
Cannot transfer
pictures.
(The Add New
Hardware
Wizard cannot
locate drivers.)

SD/MMC Cards and Internal Memory

Problem
The camera
does not
recognize
SD/MMC card.
Chapter 10
Cause
Software is not installed. Disconnect USB cable. (If using
Software is installed
incorrectly.
USB cable was
connected during
software installation.
Camera is listed as an
unknown device (PC
only)
Cause
The card may not be
SD/MMC certified.
The card may be
corrupt.
Card is not properly
inserted in camera.
Solution
camera dock, disconnect cable and
remove camera from dock). Install
EasyShare software
Disconnect the USB cable. Close all
open applications. Uninstall, then
re-install the software
To uninstall, go to Start/Settings/
Control Panel/Add/Remove
Programs.
Disconnect the USB cable.
Delete camera from Device
Manager: Right-click on My
Computer, go to
Properties/Hardware/Device
Manager/Other Devices/ (delete
this entry— ?Kodak ES camera)
Solution
Purchase a certified SD/MMC card.
Reformat the card
Caution: Formatting erases all
pictures and videos, including
protected files.
Insert a card into the slot, then push
to seat (page 9).
(page 66).
(page 66).
(page 64).
87