Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen
1
Press the Menu button.
2
Press
3
Highlight Default Print Quantity
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see
power, turn off Quickview.
1
Press the Menu button.
2
Press
3
Press
50
Chapter 6
(page
46). The default value is 1.
to highlight Setup
4
Press
quantity, then press the OK button.
5
Press the Menu button to exit the menu.
This setting remains until you change it.
page 21
to highlight Setup
to highlight Quickview
4
Press
OK button.
5
Press the Menu button to exit the menu.
The picture is not displayed on the
camera screen after you take it. To see
the picture or video, press the Review
button. This setting remains until you
change it.
, then press the OK button.
, then press the OK button.
to indicate the new default
and
page
34). To save battery
, then press the OK button.
, then press the OK button.
to highlight Off, then press the