Maintenance And Inspection - KYMCO Maxi XLS Owner's Manual

Maintenance and Inspection

Maintenance and Inspection
If you find any faults on your scooter during maintenance which are not covered by the repair
information, please contact your dealer.
Always remove faulty scooters from operation and secure them against unauthorised use (remove key).
Daily maintenance before start of journey
Check the brakes by driving slowly and then braking.
Check that the lights and indicators are functioning correctly.
Make a visual check of wheels and tyres for damage and loss of pressure.
Weekly inspections / tyre pressure
NOTE:Danger of injury due to overpressurised tyres:
The tyres will burst if inflated with too much air pressure
Never inflate the tyres over the specified pressure.
Only use calibrated instruments to measure
the air pressure in the tyres (such as are available at filling stations).
Remove valve cap (1) - check air pressure.
Inflation pressure = 25 -28 PSI
18 - 20 hPa
1.8 - 2.0 bar
Screw the valve cap back on
41
(1)
.