Pushing the scooter
In order to be able to push the Scooter, you
must disengage the drive motor.
The disengaging lever (1) is located on the
bottom right-hand side of the Scooter.
No one is permitted to sit on the Scooter when
it is being pushed.
Switch off the Scooter.
Pull the engaging lever (1) upwards as far as
the stop (limit position).
Push the engaging lever (1) downwards as far
as the stop (limit position).
= Pushing (a):
= Driving (b):
NOTES:
1.Always switch the Scooter off to push it.
2.If a pre-set speed is exceeded while you are
pushing the Scooter, the drive motor will
switch on automatically and brake the scooter
35
(2)