Canon Networked Multi-Projection Set Up And Instructions Manual page 33

8
Drag the computers for use in projection in the layout area to rearrange
them, as needed.
During projection, screens of each computer will be arranged according to their
position in the layout area.
9
Click [Start projecting].
Images are now projected from the computers in the layout area.
• To stop projection, click [Stop projecting].
• To rearrange the layout during projection, click [Start projecting] again. Note that if you
simply rearrange the layout, the new layout will not be applied to projection.
10
To end the session, click
Using the Projector in Meeting Mode
or in the upper right.
33