Using The Projector In Broadcast Mode; Procedure - Canon Networked Multi-Projection Set Up And Instructions Manual

Using the Projector in Broadcast Mode

In Broadcast Mode, a single computer is connected to up to 12 projectors.
Before projecting from projectors in other subnets in Broadcast Mode, you must configure
the router's multicast routing settings. For details, ask your network administrator.

Procedure

1
In the mode selection menu, select [Broadcast Mode].
2
The projector selection menu is displayed. In the list of projectors at left,
click the projector to connect to.
You can select up to 12 projectors. Selected projectors are listed at right.
• If the [NMPJ Password] setting has been configured on the projector's settings screen,
the password is now requested. Enter the password. For details on NMPJ passwords,
refer to the projector user's manual.
• To clear a selected projector, click
• For details on the projector selection menu, refer to "Using the Projector Selection
Menu" (P56).
in the upper right of that projector listing.
48