Before You Begin
Using the Camera Connected to a Computer
Using the Camera Connected to a Computer
Getting Started
To start using your camera connected to a
computer, do the following.
It is not necessary to turn off the computer.
1
Assemble the camera
2
Install the included software, as needed
(page
27).
Connect the camera to the computer and
3
power supply
(page
4
Turn on the computer, if it isn't already.
Contents
Back
(page
50).
78).
Next
Start DCS Capture Studio or DCS Camera
5
Manager.
If DCS Capture Studio is running, images are
saved to the computer. If DCS Camera
Manager is running, images can be saved to
the computer or to a CF Card.
6
Capture images.
7
Review and edit the images, as needed, in
DCS Capture Studio, DCS Photo Desk, or
ADOBE PHOTOSHOP with the DCR File
Format Module.
Save the images to the computer's hard drive
8
in the desired format.
Index
77