Using The Start Menu; Selecting The Source Using The Remote Control; Auto Aux Link; Listening To The Tv Or Other Device's Audio From This - Panasonic SC-XH20 Operating Instructions Manual

Using the START menu

You can select desired source, change the settings, access playback/
menus, etc., by using the START menu.
1
Press [START]B to show the START menu.
e.g.
DVD/CD
Input Selection
Setup
2
Press [3, 4]8 to select an item and press [OK]8.
≥ To exit, press [START]B.
3
Press [3, 4, 2, 1]8 to make the setting and press
[OK]8.
When "Input Selection" is selected
You can select a desired source from the menu.
≥ DVD/CD ( 11), FM RADIO (
When "Setup" is selected
You can change the settings for this unit. (
Other selectable items
The items that are displayed will vary depending on the media and
source.
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
DVD/CD
P l a y b a c k D i s c
TOP MENU(DVD)
MENU(DVD)
Input Selection
Setup
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the START menu)
You can operate the playback with the indicated controls.

Selecting the source using the remote control

Press To select
[DVD]4 DVD/CD
[RADIO]4 FM ( 8)
[EXT-IN]4 Each time you press the button:
AUX/TV: For audio input through the AUX/TV terminal.
USB: ( 13)
Confirm the audio connection to the AUX/TV terminal on the main unit when
( )
you select "AUX/TV" 7 . Reduce the volume on the TV to its minimum, and
then adjust the volume of the main unit.
Home Cinema
8), AUX/TV ( below), USB (
13)
Home Cinema
Playback/menu access

Auto AUX Link

Preparation
≥ Confirm the audio connection to the AUX/TV terminal (
≥ Set "Auto AUX Link" to "On" (
During standby mode, when there is audio input to the AUX/TV terminal,
the main unit will automatically turn on and select "AUX/TV" as the
source.
When there is no audio input to the AUX/TV terminal for 30 minutes, the main
unit will turn off.
Listening to the TV or other device's
audio from this unit's speakers
Preparation
≥ Make sure that there is an audio connection between this unit and the
TV or other device. (
≥ Turn on the TV or/and other device.
13)
Press [EXT-IN]4 to choose the source that is used to
connect this unit to the TV or other device.
≥ To change the surround sound effects and sound mode, refer to
"Enjoying sound effects from all speakers" (
15).
7)
10).
7).
9