Selecting The Destination From The History; Selecting The Destination By Entering Its Coordinates - Clarion NX700 Quick Start Manual

5. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.1.6 Selecting the destination from the History

The destinations that you have set earlier appear in the History.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Advanced mode).
2. If necessary, move between pages with
3. Tap the desired item.
4. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.1.7 Selecting the destination by entering its coordinates

This feature is available in Advanced mode only.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. [optional] Tap
3. Tap the latitude or longitude value to change the coordinates.
4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the
longitude (E or W).
5. Tap
(Advanced mode) from the Cursor menu. The route is then automatically
(Advanced mode) from the Cursor menu. The route is then automatically
,
to change the format of the displayed coordinates.
.
(Simple mode), or
to see earlier destinations.
.
(Simple mode) or
,
(Simple mode) or
42