Selecting A City Center As The Destination - Clarion NX700 Quick Start Manual

x
x
4. Select the city from the list.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
x
After entering a couple of characters, the names that match the string appear in a list.
x
Tap
4. Select the street from the list.
5. Tap the
x
If only a few intersecting streets exist, their list appears immediately.
x
In case of a longer street, a keyboard screen appears. Start entering the name of the
intersecting street on the keyboard. As you type, if the matching streets can be shown on
one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.1.2.5 Selecting a city center as the destination

The City Center is not the geometric center of the city but an arbitrary point the map creators have
chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an
important intersection.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. By default, Clarion Mobile Map proposes the country/state and city where you are. If needed, tap
the button with the name of the country/state, and select a different one from the list.
3. If needed, change the city:
x
To select the city from the list of recently used ones, tap the
After entering a couple of characters, the names that match the string appear
in a list.
Tap
automatically.
.
to open the list of results before it appears automatically.
button.
(Advanced mode) from the Cursor menu. The route is then automatically
to open the list of results before it appears
(Simple mode), or
(Simple mode) or
, (Advanced mode).
button.
37