Error Displays - Clarion NX700 Quick Start Manual

USB Devices
Problem
USB device cannot The USB device has been
be inserted. inserted with wrong
direction.
The USB connector is
broken.
USB device is not The USB device is
recognized. damaged.
Connectors are loose.
No sound heard with No MP3/WMA/AAC file is
the display "No File" stored in the USB device.
shown.
Sound skips or is MP3/WMA/AAC files are
noisy. not encoded properly.
The iPod's video The TV Signal setting of
image is disturbed. the iPod is not set correctly.

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
Display
Error 2 A disc is caught inside the
DVD player and is not
ejected.
Error 3 A disc cannot be played
due to scratches, etc.
Error 6 A disc is loaded upside-
down inside the DVD
player and does not play.
No MP3/WMA/AAC/DivX
file is recorded on the disc.
Parental Violation Parental level error
Wrong Region Region code error
DRM WMA files protected by
DRM are played.
Not Support Files not supported by this
unit are played.
54
NX700
Cause
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Store these files properly in the USB device.
Use MP3/WMA/AAC files encoded properly.
Set the TV Signal setting (NTSC/PAL) of the iPod
correctly.
Cause
This is a failure of DVD player's mechanism.
Consult your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Write these files properly onto a disc.
Set the correct Parental level.
Eject the disc, and replace correct region code
disc.
Perform the operation such as skipping a file.
(Repeat and random playback mode may be
canceled.)
Measure
Measure