Altec Lansing XM3020 User Manual page 4

XM3020
P A
OWERED UDIO
Thank you for purchasing this Altec Lansing product. For
generations, Altec Lansing has been first in audio
innovation. Today, our line of powered speakers has
received more performance awards than any other
brand. In all kinds of desktop environments, in every
price range, Altec Lansing offers sound of distinction —
giving even the most demanding customers the audio
enjoyment they seek. Just listen to this!
Box Contents
• XM3020 Speaker System
• XM Radio home antenna with 20' cord
• Power supply
• Three interchangeable XM2go receiver
docking adapters
• Rubber spacer
• User's guide and quick connect instructions
Compatible XM2go receivers:
Works with:
• Delphi MyFi XM2go receiver
• Pioneer Airware XM2go receiver
• Tao XM2go receiver
Placing the XM3020 system
1. Connect and position the XM Radio home antenna
by inserting the antenna connector into the antenna
input on the rear of the XM3020 system. Make sure
the antenna points south outdoors through a
window.
2. Position the XM3020 system on a level surface,
preferably close to you (within three feet) and
within 20 feet of the XM Radio home antenna.
System Specifications
Altec Lansing's superior sound comes from our proprietary technology, which utilizes custom-built, high-fidelity
drivers, state-of-the-art equalization circuitry, and a harmonious mix of the following specifications:
Sound Pressure Level (SPL):
Total Continuous Power:
S
YSTEM
92 dB
6 Watts RMS
• 3 Watts/channel
@ 6 ohms
@ 10% THD
Making Connections
To ensure first-time operation as expected, please
carefully follow the connection sequences described
below in the order indicated.
1. Place the appropriate XM2go docking adapter inside
the docking bay. Docking adapters are labeled for
XM2go receiver identification.
2. Place your XM2go receiver inside the docking
adapter. In most cases, the black rubber spacer
included with the XM3020 system should be
attached to the rear of the docking adapter in order
to fit the XM2go receiver snugly inside the docking
adapter. If your XM2go receiver is equipped with a
high-capacity battery, do not use the rubber spacer.
3. Insert the barrel connector from the power supply
into the DC connector on the rear of the XM3020
system. After this connection is made, insert the
power supply into a wall outlet.
4. The XM3020 system is now on stand-by mode and a
red LED should be lit.
Start Playing
Turn on your XM2go receiver. The XM3020 system is now
ready to play and a green LED should be lit.
Volume
The VOLUME knob on the XM3020 receiver controls the
master volume. Turn the knob clockwise to increase the
volume and counterclockwise to decrease the volume.
Master volume can also be controlled using your XM2go
receiver's wireless remote, if available.
Wireless Remote-compatible
The XM3020 system is compatible with the wireless
remote that came with your XM2go receiver. Simply
point your wireless remote toward the IR window
located directly above the Altec Lansing logo on the
front of the XM3020 system to control volume and other
XM2go functions.
System Response:
Signal to Noise Ratio
@ 1 kHz input:
2
80 Hz – 20 kHz (-10 dB)
> 65 dB