Burner System Assembly - Desa VH Series Stove"VICTOR HEARTH" Owner's Operation And Installation Manual

PreinstaLLation
PreParation
Continued
4"
Figure 4 - Clearance for Corner
Installation
19 / "
1
2
Figure 5 - Stove With Burner System
Bottom Dimensions
Burner system
assemBLy
STOVE BODY ASSEMBLY
1. Lift off corrugated box enclosing stove
body crating.
2. Remove all screws fastening the wood
frame enclosure. Spread wood frame
open and lift away from plastic-bagged
stove body. The bottom pieces of pal-
let wood will remain bolted to the stove
body.
3. Remove plastic bag from stove body.
4. Locate the product identification label on
the carton and record the model number
and 7 digit serial number in the space
provided in the back of this owner's man-
ual. Retain this operation and installation
manual for future reference and warranty.
6
4"
26 / "
1
4
Front
www.desatech.com
5. Amity Only: Remove back panel from
stove and discard (see Figure 6). Use an
adjustable wrench or a 10 mm socket.
Remove six (6) bolts and washers.
Keep bolts and washers to reattach rear
cover.
6. Remove all contents from inside stove
cavity. Contents include:
(1) - Stove bottom (Amity Only) (Discard
- Not used with this application)
(4) - Legs with leg leveler bolts
(1) - Bottom door
(3) - Top grates
(1) - Hardware kit bag with fasteners
7. Carefully lay stove body on back to attach
bottom components to stove body (see
Figure 7). Rest stove on drop cloth or
blanket to avoid scratching stove edges.
8. Remove remaining pallet wood attached
to bottom of stove body (see Figure 8,
page 7). Use an adjustable wrench to
remove bolts.
Bolt
Back
Stove
Panel
Figure 6 - Removing Back Panel
(Amity™ Only)
Top of
Front of
Stove
Stove
Pallet Wood Bolted to
Drop Cloth/
Bottom of Stove Body
Blanket
Figure 7 - Laying Down Stove On Side
Front of
Top of
Stove
Stove
112127-01C