Adjusting The Subwoofer Level; Using Subwoofer Boost; Adjusting The Speaker Level; Adjusting The Speaker Output Level Automatically: Auto Speaker Setup - Panasonic SC-PT860 Operating Instructions Manual

Adjusting the subwoofer level

You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.
SUB W 1
SUBWOOFER
^---------------------------------------------------}
LEVEL
-CH SELECT
≥ To check the current setting, press [SUBWOOFER LEVEL].
≥ The setting you make is retained, and recalled every time you play the
same type of source.

Using Subwoofer Boost

Main unit only
You can enhance the subwoofer effect with strong bass.
BST ON,------.BST OFF
SW BOOST indicator
SW
The SW BOOST indicator lights when
BOOST
Subwoofer Boost is turned on.

Adjusting the speaker level

You can adjust the surround sound levels.
Preparation
≥ Press [i ,` VOL] to adjust the volume to normal listening level.
≥ Select "TEST TONE" from "SPEAKER SETTINGS" in "AUDIO" menu
(➜ 22).
1
Enter test tone mode.
OK
e.g.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
OK
RIGHT, SURROUND LEFT)
`6 dB to i6 dB
≥ To exit the screen, press [SETUP].
∫ To adjust speaker level during play
(Effective when playing 5.1-channel sound or when Dolby Pro
Logic II is on.)
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L #C #R #RS #LS #SW
^----------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "ÎPLII" is not lit.
2 Press [3] (increase) or [4] (decrease) to adjust the speaker
level for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [2, 1].
Downloaded From TheatreSystem-Manual.com Manuals
# #
SUB W 2 SUB W 3
AUDIO - SPEAKER SETTINGS - TEST TONE
SPEAKERS TRIM LEVEL
LEFT − −
CENTER 0dB
RIGHT − −
SURROUND RIGHT 0dB
SURROUND LEFT 0dB
SET
RETURN EXIT : SETUP
Adjusting the Speaker output level
automatically: Auto speaker setup
[PT860]
(For only)
The speaker level settings can be optimized to accommodate your room's
listening conditions so that you can enjoy the ideal surround sound
experience. Using the supplied Auto speaker setup microphone, the main
unit adjusts the balance of the front speakers, and the volume level of the
center and surround speakers automatically.
Keep as quiet as possible during the Auto speaker setup. Loud voices,
air-conditioning noise, or excessive wind may lead to incorrect settings.
The speakers output loud test signals during setup.
Preparation
≥ Turn off the television before starting the Auto speaker setup.
≥ Make sure that "DVD/CD" is selected as the source and there are no
disc in the tray.
≥ Ensure that headphones are disconnected.
≥ For speakers with wireless system, ensure that the speakers are linked
to the main unit.
1
While stopped Connect the Auto speaker setup
microphone.
≥ Place the Auto speaker setup microphone at
actual seating position. (At ear level when
seated.)
2
Start the setup
SETUP
≥ The test signal is output from each speaker.
≥ "COMPLETE" is displayed when Auto
-AUTO SP
speaker setup is completed.
(press and hold)
To cancel the setup
≥ Press and hold [—AUTO SP] again.
("CANCEL" will be displayed when Auto
speaker setup is canceled.)
[Note]
≥ Audio settings will be restored to default if the Auto speaker setup is
canceled.
SETUP MIC
29
29